• <pre id="q13ei"></pre>
    <acronym id="q13ei"><label id="q13ei"></label></acronym>
    <tr id="q13ei"><strong id="q13ei"><listing id="q13ei"></listing></strong></tr>
    1. <track id="q13ei"><ruby id="q13ei"></ruby></track>
      1. <acronym id="q13ei"><strong id="q13ei"><address id="q13ei"></address></strong></acronym>

        <td id="q13ei"><ruby id="q13ei"></ruby></td>
      2. 18839828187

        CN
        Refractory product series Auxiliary Material Series Feeder Head Product Series Functional Coatings Series Resin Product Series
        Series of phenolic urethane resin

        Exothermic-insulating sleeves are used to increase the yield in foundry practice. Function of the sleeve is predominant to enhance the effective casting modulus by increasing feeding efficiency. This is represented by a modulus extension factor (MEF)

        product details
        • Characteristic

          Phenolic urethane resin comprises three components, first component is phenolic resin, the second component is a poly isocyanate, the third component is catalyst.

          1. Fast solidification speed and uniform solid performance, higher release properties and high temperature strength;

          2. Using time and release time ratio can reach more than 75%;

          3. Does not contain S, P, Small gas flow, lower porosity.

          4. Scattered well, reduce crack defects;

          5. Wide adaptability, can be used in cast iron, cast steel, non-ferrous metals.

        • Using introduction

          If using batch-type mixer, before prepare the mixed material, please pour the catalyst first added to the component 1 and uniformly mixed. Mixed it with the sand for 1 minutes, then add the component 2 and mix for 2 minutes. Then making the core using the mixed sand. If using the continuous mixer, the amount of catalyst components with the proposal to join the 1 resin sand, then adding 2 component resin. Immediately making core or molding after mixed.

          Component 1 and component 2 ratio is generally (50~55%): (50~45%) . The amount of catalyst is 0.5~3% of component 1, and it should be added into the component 1 when using.


        • Resin technology index

          gradeindex

          density(20℃) g/cm3

          viscosity(20℃)≤mPa.s

          Free formaldehyde%≤

          Shelf life(years)

          Scope of application

          YG-RF001

          1.06-1.12

          220

          <0.5

          6 months

          cast iron,cast steel

          YG-RF002

          1.06-1.12

          220

          0

          6 months

          cast iron,cast steel

          YG-RF003

          1.08-1.18

          50

          -

          6 months

          cast iron,cast steel

          YG-RF004

          0.92-1.02

          100

          -

          6 months

          non-ferrous metals

          YG-RF005

          1.05-1.15

          50

          -

          6 months

          non-ferrous metals


          Catalyst technical index

          Brandindex

          XYG1

          XYG2

          XYG3

          XYG4

          XYG5

          viscosity(20℃)≤mPa.s

          10

          10

          10

          10

          10

          Density(20℃) g/cm3

          0.92-1.02

          0.95-1.05

          0.90-1.00

          0.92-1.02

          0.90-1.00

          Scope

          winter≤15℃

          spring and autumn10-25℃

          spring and autumn15-25℃

          spring and autumn20-30℃

          summer>25℃


        • Matters needing attention

          1 This product is stimulating to the eyes and skin. When using, workers should wear good appropriate protective clothing, gloves and protective glasses / mask.

          2 Once the eyes contact with it, please lift the eyelids, wash eyes with the flow of water or saline flush 15 minutes and then go to the doctor.

          3. The product is flammable. It should be stored away from the fire source, to avoid the heat or direct sunlight. If a fire, spray water, foam, CO2 or dry powder to put put the fire..

          4.The product should be stored in a cool, dry place, must be sealed, especially NP102 to prevent water and react.

          5 Be careful when handling.

        Email

        johnli.csm@gmail.com

        Technical advisor

        +86 18239875308

        Sales Manager

        +86 18239875308

        Whatsapp

        +86 18239875308

        WeChat

        +86 18239833671

        Copyright Sanmenxia Sunlight Casting Material Co.,Ltd.

        All Rights Reserved. Designed by Wanhu

        免费a级作爱片免费观看中国,欧美大片在线观看完整版,人妻丝袜av先锋影音先 免费a级作爱片免费观看中国,欧美大片在线观看完整版,人妻丝袜av先锋影音先,乌克兰美女的小嫩bbb,男人狂揉摸下面女人高潮,男人狂揉摸下面女人高潮

      3. <pre id="q13ei"></pre>
        <acronym id="q13ei"><label id="q13ei"></label></acronym>
        <tr id="q13ei"><strong id="q13ei"><listing id="q13ei"></listing></strong></tr>
        1. <track id="q13ei"><ruby id="q13ei"></ruby></track>
          1. <acronym id="q13ei"><strong id="q13ei"><address id="q13ei"></address></strong></acronym>

            <td id="q13ei"><ruby id="q13ei"></ruby></td>